Pc-concepts Full-Rated Router ADSL2+ Manuel d'utilisateur télécharger pdf (Page 93)

3. In the Upgrade File text box, type the complete name of the file to be downloaded

and loaded to flash, as indicated by your ISP.

The name of the upgrade file must be either TEImage*.bin or TEPatch*.bin, where

* represents any of additional characters, up to a total filename length of 256

characters.

4. In the Username and Password fields, type the information required to log on the

ISP's server (if the ISP requires it).

5. Click Upload.

An alert window pops up displaying the following message:

6. Click OK to start the image upgrade.

The file begins downloading from the ISP's server and loading the image into flash.

When image upgrade is complete, the following message displays Æ Remote

Image Upgrade Successful...

The system will proceed to reboot itself automatically. Wait 1 minute to allow the reboot to

complete, then refresh your browser and log in again to the device. You must refresh your

browser and log in again if you want to continue using Configuration Manager.

5.8.5 Alarm

You can use the Configuration Manager to view information about alarms that occur in the

system. Alarms, also called traps, are caused by a variety of system events, including

connection attempts, resets, and configuration changes.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 103 104

Pas de commentaire

Pc-concepts Full-Rated Router ADSL2+ Manuel d'utilisateur Page 93